Diesel RAM Forum banner
1 - 11 of 11 Posts

· Registered
Joined
·
93 Posts
Discussion Starter · #1 ·
I've noticed the "auto high-beam dimming" feature doesn't work worth a crap! If I turn on my headlights to "auto", the high beams won't come on unless it's COMPLETELY black out. Even a streetlight will make them dim down. Is there an adjustment for these somewhere? Am I missing something obvious here?


Is there an adjustment for the headlight beams? Bringing them up just a little would do wonders! I really dislike driving this truck at night until I get these issues settled. I feel like I'm driving half blind!
 

· Registered
Joined
·
173 Posts
I find auto high/low beam headlights to be useless...use it manually as noted above.
 

· Registered
Joined
·
93 Posts
Discussion Starter · #6 ·
I have not looked for a RAM service manual, but on 2 of my older cars there was an adjustment screw that would raise or lower the beam. If you want them higher there may be something like this in the RAM
Are we talking adjusting the height of the headlight beam? If so, there is an adjustment screw under the hood, but I don't know which way is up...
 

· Registered
Joined
·
104 Posts
I used to have a BMW that had auto high beam dimming. It was way to sensitive and would go to low beam with the least amount of light in the area. It wasn't until I was in the country on two-lane highways with no street lights that it worked perfectly. And so I began to realize that this feature, which I imagine is the same in the Ram, is really not going to work well or at all in a city or urban area.
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top