Diesel RAM Forum banner

1 - 13 of 13 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
So what's been going on with your new Ecodiesel ? Lets talk about our problems and see if there's a pattern .
 

·
Registered
Joined
·
412 Posts
Welcome.


It's your first post. Since you say "our" problems, you start. What problems are you having?


As for me, there have been no problems. Got mine in early March as one of the first delivered. Close to 10K miles right now. I can talk a lot on what is good. Engine negatives are literally nonexistent.
 

·
Premium Member
Joined
·
476 Posts
So what's been going on with your new Ecodiesel ? Lets talk about our problems and see if there's a pattern .
Welcome to the site. You'll find lots of great people and information here. What kind of problems are you having with your truck?
 

·
Registered
Joined
·
412 Posts
There's supposed to be some kind of reflash for the sensor issue. Seems it might be a software glitch.


Just drive the thing. Not much of a solution but for now, that seems to be the conclusion.
 

·
Registered
Joined
·
406 Posts
There's supposed to be some kind of reflash for the sensor issue. Seems it might be a software glitch.


Just drive the thing. Not much of a solution but for now, that seems to be the conclusion.
That's what i was thinking when it comes to this. Just have to wait for a fix or take some action to influence a fix coming out.
 

·
Registered
Joined
·
77 Posts
the only complaint I have is after I got it home and found two small paint runs and a dent when the light hit the rear of the cab. Service at Chrysler fixed it all up.
 

·
Registered
Joined
·
9 Posts
the only complaint I have is after I got it home and found two small paint runs and a dent when the light hit the rear of the cab. Service at Chrysler fixed it all up.
Ignoring the check engine light doesn't sound like a rational "fix". Welcome to the world of FIAT...fix it again, Tony!!! Loose connectors, bad software, mechanics that aren't trained properly...sounds like Chrysler will be up for sale again...and soon! (Anyone in China listening in???)
 

·
Registered
Joined
·
12 Posts
I have 4000km on mine and have no issues at all as of yet, I even put an oil catch can mod on it and it didn't throw a code. Runs great and has lots of grunt for what I need, makes me glad i didn't buy a gas truck again every time I hook onto something.

This emissions light that I hear everyone talk about, I wouldn't be happy about it but I wouldn't worry about it either, I have bought several new vehicles in the past that were normally aspirated gas and had an emissions and it was always looked after in time.
 

·
Registered
Joined
·
77 Posts
Ignoring the check engine light doesn't sound like a rational "fix". Welcome to the world of FIAT...fix it again, Tony!!! Loose connectors, bad software, mechanics that aren't trained properly...sounds like Chrysler will be up for sale again...and soon! (Anyone in China listening in???)
After reading my quote you quoted, I noticed my comment wasent clear: I could only see the dent and runs when I looked at different angles and the light/shine would show image refractions and shines from the runs. no check engine light was on. My bad, the comment was not worded correctly.
 
1 - 13 of 13 Posts
Top